Bests & Worsts Reviews from Amazon

This product works really well. And is easy to apply. The preparation to apply the product is where it is difficult and time consuming. You're gonna need about 5-8 hours. 1. Wash car with a non wax soap. I used citrus from Chemical Guys. 2. Decontaminate the car with a iron/tar remover spray. I used CarPro Trix. 3. Clay bar the car with ClayBar and Lubricant. I used Chemical Guys. 4. Dry the vehicle and Polish using a Dual Action polisher. Depending on the damage of the paint you might have to use different pads and compounds. I used Chemical Guys v36. Compound with a Blue Hex Pad. My car is only a month old. 5. Decontaminate the vehicle from left over polish residue with Isopropyl Alcohol. Spray on towel not car. I used Target brand. first aid section. 6. Ceramic Coat with Color N drive. After applying wait approximately 8-10 minutes. You'll see it haze. Use a LOW PILE (short fabric) microfiber cloth to buff it the haze. Don't let it sit for too long it will be very difficult to buff out and also might damage your vehicle. 7. Seal off with CarPro Reload to protect and allow the cost to cure without any contaminations. This job takes HOURS to do and requires a lot of. Microfiber towels. But the results are excellent.