Bests & Worsts Reviews from Amazon

I'm a professional cobbler and we stock these all the time, we make sure to never run out because in our opinion its one of the best protective half soles out there. They are thin and they are supposed to be used to extend the life of your lightly worn shoes and not to patch up shoes. To install: 1. line up this vibram half sole to your shoe sole and mark were you are going to place it and line up to make sure the pair are going to be identical 2. rough up and/or sand both the shoe sole and the vibram half sole where you are going to put on the contact cement 3. use only barge contact cement or anything stronger like renia kelbfest as the adhesive, shoe goo will not work and it will separate in just a couple wears 4. apply contact cement and let dry about 15-30min (depending on directions of the cement) until tacky then apply half soles to shoe soles 5. once half soles are applied, let dry at least 12 hours 6. trim with heavy duty scissors or x-acto knife 7. finish edge with 150 gt sandpaper, then 220 gt to make a nice edge These are probably the easiest job we do, but someone without the right tools will have a hard time getting it right.