Bests & Worsts Reviews from Amazon

There are two basic kinds of kits. Ones with crap parts you can’t duplicate the picture on the box with unless you’re a pro, and kits you can replicate the pic with if you can follow instructions. This is one of the latter. There are a lot of very tiny parts but you can duplicate the pictured completed item with this kit. Get some clear silicone based glue, (white/Elmer’s won’t do the trick here) a good pair of scissors, a ruler, hobby knife, and pencil and you’re golden. Most importantly, check your kit to make sure it’s all there. The first one they sent was missing a pack of papers needed to complete it. The replacement was good though. Watch as you build, the final 3 triangular roof sections can be badly off kilter if you aren’t careful during the build. By using silicone glue you can adjust for this though. I used every tag and label on this build. I’d say I managed a 95-98 out of 100% perfect copy of the box art. Take your time and pay attention and you will make this item look as pictured. This was my first build of this type kit and I have a pretty severe hand tremor problem. So if I could do it you can. Follow the book in the order shown or you’ll end up with problems getting items in place. I use Beacon 3 in 1 glue and this will work for the whole kit cover included. As an extra tip on the roof... When you start putting up walls, take the roof sections and set them in place. Tie them in place temporarily with string or wire while the walls set. This’ll make sure everything fits later on.