Bests & Worsts Reviews from Amazon

We have installed two of these bidets now. One is in our master bathroom, and one in our second bathroom. One toilet is the elongated type, and the second one is the standard size. Both fit on the toilets just fine. We did not need bumpers. I also purchased the metal t-adapters, and I highly recommend the Luxe Metal T-adapter with Shut-off Valve. We also bought the Bella Bidet Solid Brass Metal T-adapter, and used that in the second bathroom. The Neo bidets come with a white plastic adapter, but I didn't like that. The metal t-adapters are stronger, will last longer, and they also have the water pressure valve to control your water pressure. We found that full water pressure was too much for us, and so we reduced the water pressure using the metal T-adapter valves. You can also adjust the water pressure with the handle on the bidet. There are two controls on the bidet: one for turning the water off and on (the longer handle toward the front), and the dial for what type of spray. You can choose between the heiny-wash, the feminine wash, or the nozzle cleaning settings. This works without electricity. When it's all attached and the water is turned on, you pull up gently on the front control knob. The water stays on until you push it back down again. For lighter water pressure, pull gently, and then you can pull up more until you get just what water pressure you want. Then you dry off with one piece of toilet paper. I don't really like the feminine wash - it doesn't hit in the right place, the spray is wider and gets my legs wet, and if I'm not careful it sprays out onto the floor, so I am not going to use that setting. This bidet is going to greatly reduce our toilet paper usage, and increase our comfort. We live in south Florida, so the water never gets really cold here, so we didn't need to buy a bidet that uses hot water. The water is cool in the winter, but not shocking. You can buy a unit that connects to your hot water pipe as well as your cold water, if you live in a northern area with cold water. I have to emphasize that this doesn't take a strong person to install. You have to make sure everything is perfectly lined up when you are connecting the water connections, and do not screw anything on crooked. Then tighten it by hand. Then I tightened the three connections to the metal t-adapter just a little with my wrench. You can not use a wrench on the connection to the bidet, because the connection will break quickly, as it is plastic. If you tighten anything too much, it will leak! We ended up buying several of these, until we got it right. I also highly recommend that you watch several of the videos that Amazon customers have made. So, I love this! It is comfortable, and refreshing. I wish I had had this long ago! I particularly like the type of control handle this bidet has, just pull up slowly on the lever until you get the pressure you want, then push back down to turn off. I haven't seen this type of control handle on a bidet anywhere but on Amazon. (the others are all dials) So: 1) buy the separate Luxe metal t-adapter, and 2) line everything up carefully and don't tighten too much.